I think the buttons on the X1C can be improved. They gave us a “Power Off” button and an “Emergency Stop” button, but the off button isn't an off button and the emergency stop button isn't an emergency stop button! The off button is actually a turn screen off button and the emergency stop button is actually a "pause print eventually” button. I decided to fix that and it's not hard to replace them!
To get the most detail out of the labels it's best to print with a .2mm nozzle but it's not required. All examples here are with a .4mm nozzle.
I have made my Fusion360 file as well as a STEP file available so you can customize them yourself. If you don't know how to use a CAD program, you can customize them right inside Bambu Studio. Here's a great tutorial from Ashley's Print Shop: https://youtu.be/UekEbg_ZkgI?si=lhKWQ-em_8kgHWXO
Included:
Instructions:
Remove the front panel following the instructions from Bambu Lab then follow the steps in my pictures below: https://wiki.bambulab.com/en/x1/maintenance/replace-front-cover
![]() |
![]() |
![]() |
![]() |