What If… Deadpool could use the force?

I've made this file customizable, you can choose the colour of the light saber, Does deadpool weild a green saber? Purple? The choice is yours! Just swap the yellow colour for your choice when slicing. If you choose to make deadpool a sith-lord and use red, I recommend not using the same red, for better contrast.

If you're looking for a commercial license to sell my prints, or to make a custom design request, please head over to my Patreon where those options are available: https://www.patreon.com/CanadianGamer3DPrintsEDM

The rest of my comic hueforge collection can be found here:

https://makerworld.com/@CanadianGamer/collections/549689

In my print profile I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match! Do not change the print profile to match or it will not look the same!

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

The pictured Frame is a friction Fit design here for 200x200 Hueforges
https://makerworld.com/en/models/381229#profileId-281475

And if you scale it down, I have frames for 100x100 or 150x150 here:

https://makerworld.com/en/models/173529#profileId-190705

Please post a picture of your printed copy! I'd love to see it!

— Printing Instructions---

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Generic Black Transmission Distance: 0.2
PLA Sunlu Red Transmission Distance: 5.1
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #15 (1.2mm) swap to Red
At layer #21 (1.76mm) swap to Ivory White
At layer #26 (2.16mm) swap to Yellow for the rest. (This is just the colour for the lightsaber)