Gridfinity - ESP32 Storage Bin (5x) by Toby

Toby

Tools>Organizers

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 13% infill

Designer

1.9 h

1 plate

4.8(6)

0.2mm layer, 2 walls, 7% infill gyroid

1.8 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Do you find yourself digging through piles of electronics, PCBs, and various bits and pieces in your drawers or storage containers? Let's put an end to the clutter with Gridfinity!

Check out my newest addition: A 1x2x6 Gridfinity ESP32 storage bin. It's just the right size to organize up to five ESP32s comfortably. I've made the slots a little wider so that they can fit items from different makers or batches without a hitch.

The model supports friction-mounted 6x2mm magnets.

My preferred printer settings:

Material: Bambu PLA (Tough) on a Textured PEI Plate
Presets: 0.20mm Standard
Walls: 3
Infill: 13% Gyroid pattern

You can tweak the wall thickness and infill to use less material, but these settings gave me the most even-looking print.

Please share any thoughts or suggestions on this model. I always appreciate your feedback!

My other designs:

Please take a look at my other designs, too. If you can't find what you need, just let me know. I'm here to help fill in the gaps in the collection for you.

Happy Printing!

Gridfinity by Zack Freedman: https://www.youtube.com/watch?v=ra_9zU-mnl8

Comment & Rating (12)

@nbloedel

Boosted

Print Profile

0.2mm layer, 3 walls, 13% infill

Came out perfect. Nice simple design fits the ESP32s very nice. Thanks!

The designer has replied

@toby_nz

Happy to hear that you like it! Thank you... 👍🏻

@bing

Print Profile

0.2mm layer, 3 walls, 13% infill

handy thing, printed perfectly in sport mode on x1c. a lid might be a nice addition

(Edited)

The designer has replied

@toby_nz

Thank you for the five-star-rating, @bing ! 🤗 If you like, I can provide a version with higher walls and lid to cover the ESP32s accoringly. Would you be interested in testing the model?

@bing

I'd be happy to yep! was planning on designing some for the wemos d mini and esp-cam boards myself.

(Edited)

@UoAoE3D

Print Profile

0.2mm layer, 3 walls, 13% infill

The designer has replied

@toby_nz

Thanks for your rating and the picture. A decent amount of ESPs in the picture... 😁

@Freebird

Print Profile

0.2mm layer, 3 walls, 13% infill

The designer has replied

@toby_nz

Thanks for your rating! It is greatly appreciated. 👍🏻

@user_442537967

Print Profile

0.2mm layer, 3 walls, 13% infill

The designer has replied

@toby_nz

@user_442537967 Thank you for your rating! Is there something specific that prevents you from giving a five-star review? I would be happy to get feedback to improve the model further. Thanks.

(Edited)