Bambu Lab A1 mini Tool Box by DontPanicJansen

DontPanicJansen

3D Printer>3D Printer Accessories

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

5.7 h

2 plates

4.6(38)

Open in Bambu Studio

Boost

144

278

393

242

Released

Description

A storage box for the Bambu Lab A1 mini tool set. The cover and tray must be printed individually and then pressed together.

The cover closes perfectly with two 6x2mm magnets.

In this version, I have swapped the Bambu Lab logo on the front with the lettering.

Have fun printing!

Don't Panic, just print it ;)

Comment & Rating (45)

@Harvey3D

poor design as far as trying to fit the bambu lubricant oil, doesnt fit or allow lid to close

The designer has replied

@dontpanicjansen

Really sorry that you're having trouble with the printing. As you can see from my pictures, the tubes fit perfectly in the box. In your case, you probably have different tubes than I do. I assume that Bambu Lab sends different sized tubes with the printers and does not have a one size fits all solution. I hope you still had fun printing! Thank you for your comment. 🙏🏼

@Hexxas_kozak

Great tool Box is first thing i wanna say , but i did find a small issue with it , the place for the rubber grit/block for cleaning the printer head is too small its missing about 8 mm in length , as my photos is showing, im not gonna reprint it , but i do want to let you know about it so you can make an update to it :) and mabee you can put a mirco sd slot or two in the new updated version? So if i have alot of spelling errors , im dyslexic and english is not my main laugusish , but i learn to live with it and i hope people can live with the spell errors i make too :) its a great tool box and hopefully it will become perfect after the fix :) thanks again Btw im using the new version of Bambu Lab A1 3d printer. Cheers and Best regards

(Edited)

@user_513055735

Love this Toolbox! Oddly, placing the lubricant tube inside didn't allow my lid to close, but otherwise it works really great with the 6x2mm magnets.

@user_2943224745

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed good

(Edited)

@adrigarro

Print Profile

0.16mm layer, 2 walls, 15% infill

(Edited)

Other Issues:The space for the lubricant is smaller than the lubricant. The balls to couple the lid printed badly and was hard to couple it and the lid won't close because, again the space for the lubricant had to be more profound (maybe that issue is covered if you install the magnets, cuz i didn't).

The designer has replied

@dontpanicjansen

Really sorry that you're having trouble with the printing. Without images, unfortunately, I can't offer real help. To connect the lid to the box, the lid must be pressed onto the box with a lot of force. The cut-out on the box are designed so that the connection point on the lid fits perfectly. The lid should already be perfectly flush with the box without magnets. The magnets only serve to keep the box closed during transportation. I wish I could help you more! Hope you can solve the issue. Thank you for your comment and rating. 🙏🏼

@mo3D

Print Profile

0.16mm layer, 2 walls, 15% infill

(Edited)

@Donminiccruz

Print Profile

0.16mm layer, 2 walls, 15% infill

@AmezDraven

Print Profile

0.16mm layer, 2 walls, 15% infill

Great little box for the included tools. if you have issues with it closing it’s likely because your magnets aren’t strong enough or your filament is shrinking too much. Didn’t think it would be this thick but kind of happy it is as it gives it heft to not slide around easy