3D Vise - 100% 3D printed vise
Copyright Claim
3D Vise - 100% 3D printed vise
Boost
147
264
11
Print Profile(1)
0.2mm layer, 3 walls, 10% infill
Designer
9 h
1 plate
Open in Bambu Studio
Boost
147
264
11
6
324
109
Released
Description
A hundred percent 3d printed vise for light work. No screws or the like are needed. Holds things in place when laser engraving or soldering, for example. Not suitable for heavy mechanical work. Use glue when fitting the threaded part if you want extra strength.
Max opening 12 cm.
Comment & Rating (11)
All
Print Profile
0.2mm layer, 3 walls, 10% infill
gedruckt mit einem A1 Mini, Größe auf 70% reduziert, passt alles auf eine Platte. Druck perfekt , Genauigkeit top. Filament Bambu Lab Pla Basic , Parameter von p1s Vorlage übernommen.
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Tres bel étau , imprimer sur A1 mini a 80% . Ajustements a faire car les filetages n'étaient plus bon mais c'est normal etant donner que j'ai reduit l'échelle et donc les jeux. Parfaitement fonctionnel ☑️ 👌🏼 merci beaucoup 🙏
1
Reply
Just change "vice" to "vise" in the description so that it will be found by searches.
The designer has replied
2
Reply
Good piont. Thanks! :)
0
Reply
Great vise, printed with ABS and feels really strong, good job!
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
printed excellent on my X1C. great for soldering my battery connectors
1
Reply
I printed it with ABS-GF filament it it failed. Both the screws and the end of the threaded rod broke. I could be that the filament is too rough from the material I used.
0
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
1
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 10% infill
1
Reply
Print Profile
0.2mm layer, 3 walls, 10% infill
Strength Issue:both screws broke with little pressure then the end of the screw part broke.
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld