Christmas Tree Candy Dish v2
Copyright Claim
Christmas Tree Candy Dish v2
Boost
43
109
27
Print Profile(3)
High Quality - Fast Print
4.8 h
2 plates
![50% - Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US3a20c3ed931469/design/2023-12-09_7e62839f1208.jpg?x-oss-process=image/resize,w_100/format,webp)
50% - Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
2.1 h
2 plates
![Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US3a20c3ed931469/design/2023-12-09_07320d3fe131.jpg?x-oss-process=image/resize,w_100/format,webp)
Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
6.9 h
1 plate
Open in Bambu Studio
Boost
43
109
27
0
84
144
Released
Description
This tree has been printed with PETG and PLA without issue.
- The tree does not need any supports.
- The star will need supports. I printed it in a few directions, I found the direction I have it was the easiest way to print the star.
The star will fit in the hole at the top of the tree. Depending on your tolerances you may need a drop of superglue to hold it.
Print Settings
- Layer Height – 0.2mm (or 0.4mm with an .8mm nozzle)
- PETG or PLA
- Infill — 15%
- Perimeters – 3
- Top Fill Pattern – Rectangular
- Bottom Fill Pattern – Rectangular
Comment & Rating (27)
All
Print Profile
50% - Adaptive layer height, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
I absolutely love these! Just adorable. However, the supports on the tiny star are so strong that they break the spindle off when try to remove them. Any suggestions?
The designer has replied
1
Reply
Oh no! I can see from your picture that the star snaps on the bottom, and probably is due from the use of silk material that create a stronger bond between the object and the support. I can try to update the profile and add a plate dedicated to the star with easier-to-remove supports, is it OK for you?
(Edited)1
Reply
Replying to @ValdiLab
You are the best!!! That would be perfect. Thank you!
0
Reply
Replying to @nicole.27.yost
Done, see image attached, there is a "page" (the 2nd one) dedicated to the star with different support settings, hope can be helpful!
After trying it, would you mind changing the rating to 5 stars? That would be a very nice gesture! :)
0
Reply
The print profile is no longer public
really cute. holds lots of goodies.
1
Reply
The print profile is no longer public
An awesome model. Not sure it needs a brim but printed fine either way.
The designer has replied
0
Reply
Looks great!
0
Reply
The print profile is no longer public
Really nice Print
The designer has replied
0
Reply
Looking good now I want some candy 🤣
0
Reply
The print profile is no longer public
The designer has replied
1
Reply
Looking good 😎
0
Reply
Print Profile
High Quality - Fast Print
0
Reply
I saw this and was: Now we need to add lights! Can you add 30 holes for mini led lights battery powered? Could also scale 122.11 so you can have more room for lights and candy! That would be the max size for Bambu X1C printers. Might need to open a small hole at the top and make plug to cover the hole so you can even light the start. Here are the perfect lights on amazon.
https://www.amazon.com/Operated-Assorted-Valentines-Decoration-Christmas/dp/B016N2ZZKI/ref=sr_1_58?keywords=battery+mini+christmas+led&qid=1704841312&sr=8-58
Then this would be perfect to hold candy to give out during our annual Christmas light show each year. Free candy and a show. Only way to make it better is to get the candy from a lighted christmas tree candy dish!!!
I ordered the lights already. I can send you the measurements when they come in.
(Edited)The designer has replied
0
Reply
I will look into this when I have some time. About 6 month or so from now.
0
Reply
love it mate
1
Reply
The print profile is no longer public
Turned out amazing!!! Thanks for sharing.
0
Reply
The print profile is no longer public
cute print wife loves it for her work.
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld