Articulated Train

Articulated Train

Boost
59
110
17

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2 h
1 plate
4.9(11)

Open in Bambu Studio
Boost
59
110
17
3
132
137
Released

Description

Articulated train with locomotive, coal cart and passenger cars.

Printed model is approximately 32cm long.

Prints upside down with tree supports that easily snap without tools.

Modern train version is available here: https://makerworld.com/en/models/515736

 

General 3d Printing Tips

  • Make sure your printing plate is clean! Oils from your skin will cause adhesion issues for your prints. Regularly wash your print plate with a detergent like Dawn and avoid touching the surface when removing prints from the bed.
  • If it's an option on your printer, always opt to level the bed before each print. If you have to perform this manually, make sure you do this after every few prints. It takes a bit of time and patience, but it's a fair trade for reliable prints.
  • Ensure bed and nozzle temperatures are within the expected range for the material you are printing. Temperatures that are too high or too low will affect the print negatively by causing warping, malformed layers or adhesion issues.
  • Reduce your printing speed. Slower print speed is especially important for overhangs because it gives the material more time to cool as it's deposited.

Comment & Rating (17)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
easy and fast print👌
The designer has replied
1
Reply
Thanks! Glad you like it! :)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
This came out really nice. I was skeptical at first because there were no ratings yet but decided to give it a shot. Glad I did, my son loves it. The support came out really clean too. Printed in Sunlu PLA+ white.
The designer has replied
1
Reply
Thank you. I'm happy to hear your son is enjoying it!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
Thank you for rating :)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
print ok
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
1
Reply
thank you!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The designer has replied
0
Reply
Thank you for posting the rating.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.