Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Kexcelled Peacock Blue Transmission Distance: 3.4
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #10 (0.88mm) swap to Yellow
At layer #14 (1.2mm) swap to Peacock Blue
At layer #19 (1.6mm) swap to BambuLab Green (Using 4 colors AMS by Bambulab, after the pause--> BLACK REPLACED WITH GREEN)
At layer #22 (1.84mm) swap to Jade White for the rest. (after the same previuos pause--> RED REPLACED WITH WHITE)

I have carried out tests with filaments from other brands (for example Winkle and the results are still excellent)

Write to info@ps3dcreative.com if you need more information or clarifications