Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue
At layer #15 (1.28mm) swap to Yellow
At layer #23 (1.92mm) swap to White for the rest.

Remember if you sant to scale, do it only with x and y axis, z must be the same as original.