Do you know this spooky feeling? Something is watching you…
Now you can enjoy the being-watched-feeling everywhere, anytime you want - just print you own eyes!

Add some double sided tape to the back and stick your eyes anywhere you want.
Or add a Ø6x3mm magnet and put them on your fridge. So everytime you are going for a snack, YOU ARE WATCHED! We know who took the last sausage…
Or print the round version and let them roll around in your house. Endless fun guaranteed … if somebody steps on them…
Are you paranoid because of your webcam? Add an eye and you have a reason to be paranoid.

There are three versions:
round - can be rolled around
straight - looking directly into your soul
angled - watching you from the side

Printing is simple - just print everything with 0.2mm layer height, no support needed, 3 walls are recommended.
Use 100% infill or 10 tops & bottoms for the bottom part of the round print. Then the round eye is heavy at the lower part and the iris will always be facing upwards.

For assembly just glue the iris and the pupil to the eyeball. You can add a Ø6x3mm magnet to the back as an option.
The round eyeball has a midpin so it is easier to align the top and bottom halves.
If you want you can add a white reflex spot with a permantent marker or use some white paint.

Disclaimer:
This work by blecheimer is licensed under CC BY-NC-SA 4.0
You are not allowed to copy this model to other 3D printing websites without my permission.