A simple tray that clips on to the front extrusion to place your discarded wipe boogers in!
This works on v-slot extrusions, please let me know if it works on t-slot, and I'll update this description.

Can be mirrored to fit on the right side.

Print instructions:
1. Make sure your hotend max flow is set in your slicer!
2. Set outer wall thickness too 1.2mm (Yes, a .4mm nozzle can do this)
3. Slice in spiral mode/Vase mode

You might want to slightly increase filament temperature.

Like my work? Support me on Ko-fi!

Linktree