nice hueforge elephant color pop

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA PolyTerra Charcoal Black Transmission Distance: 0.3
    PLA PolyTerra Fossil Grey Transmission Distance: 2.1
    PLA PolyTerra Lava Red Transmission Distance: 1
    PLA azurefilm yellow Transmission Distance: 3.5

Swap Instructions:
    Start with Charcoal Black
    At layer #9 (0.8mm) swap to Fossil Grey
    At layer #13 (1.12mm) swap to Lava Red
    At layer #16 (1.36mm) swap to yellow for the rest.