nice hueforge elephant color pop
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Fossil Grey Transmission Distance: 2.1
PLA PolyTerra Lava Red Transmission Distance: 1
PLA azurefilm yellow Transmission Distance: 3.5
Swap Instructions:
Start with Charcoal Black
At layer #9 (0.8mm) swap to Fossil Grey
At layer #13 (1.12mm) swap to Lava Red
At layer #16 (1.36mm) swap to yellow for the rest.