Toolhead cover for X1 series
Copyright Claim
Toolhead cover for X1 series
Boost
127
182
30
Print Profile(2)
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
Designer
5.1 h
1 plate
0.4mm nozzle, 0.1mm layer, 3 walls, 100% infill
2.1 h
1 plate
Boost
127
182
30
5
197
39
Released
Description
工具头前盖，但是猫咪，适用于x1系列，相比起原始零件进行了调整，减少了悬垂结构，以提高打印质量。
*请尽量使用PETG或耐热性更好的工程耗材进行打印，PLA耗材打印的工具头前盖在打印尼龙等高温耗材时会因为高仓温而变形脱落，可能导致损坏设备。
您还需要额外准备两颗N52级别的Φ4mm x 2mm圆形磁铁，用于将此前盖安装到工具头上。
Toolhead cover, but with a cat on it, for the x1 series. Compared to the original part, the overhang structure has been reduced to improve the print quality.
*Please try to use PETG or engineering filaments with better heat resistance for printing, the toolhead cover printed by PLA filaments will be deformed and fallen off due to high storage temperature when printing high-temperature consumables such as nylon, which may cause damage to the equipment.
*You will need two N52 grade Φ4mm x 2mm round magnets for attaching it to the tool head.
Comment & Rating (30)
All
mine printed amazing with carbon fibre pla and it's been running quite amazing since I swapped it from the default cover the magnets I used are really strong aswell so the cover definitely ain't falling off during printing my next upgrade is to install the light in the tool head 😀 cheers for this mod ☺️
2
Reply
A very delicate and lovely model. I printed a sample using PETG and found that there was shrinkage at one corner of the lower mouth. It doesn't fit with the other air ducts. and it`s good for p1 use.
1
Reply
Print Profile
0.4mm nozzle, 0.1mm layer, 3 walls, 100% infill
overall pretty good, I did have an issue with the strength of the screw points for attaching the fan as one broke off completely while trying to secure the fan. I printed this in PETG as well. otherwise pretty cool
(Edited)
0
Reply
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
I tried to print it for my p1 with my friends a1, It doesnt stick very well, and the supports have more issues
0
Reply
is it good for the P1S also?
The designer has replied
0
Reply
I`m not sure, cause I only have X1,sorry, but you can use cheap filament and high print speed to print a test sample.
0
Reply
Replying to @lloydliu
yes ok thanks!
0
Reply
Replying to @Mayflower10
Hey I was wondering if you had tested this, if not i will give it a go for the P1
0
Reply
你确定是 φ6*2mm磁铁？分明是φ4的孔。。。不会是搬运工吧
The designer has replied
0
Reply
重新检查了下确实是4*2mm的磁铁，这个做出来后一直在忙别的东西项目隔了一个多月才上传，没有仔细检查，十分抱歉
0
Reply
Replying to @lloydliu
除了这个标注有误差，其他的设计都很好。磁铁安装孔和挂钩下面都自带了具有支撑的斜面，设计的很到位。点赞！
0
Reply
Replying to @kai2024
感谢提醒~
0
Reply
Print Profile
0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill
definitely does not require 6x2 magnets. only 4x2 fit for me.
The designer has replied
2
Reply
The correct size is Φ4mm*2mm. I`m sorry for my carelessness.
0
Reply
I need this without the cat ears please!!
0
Reply
I can remix this into a no-cat-ear version if you want. But it's kinda cute with them !
0
Reply
Replying to @veryconfusing
Please do! I tried doing it myself, but I'm just recently learning fushion 360 and the mesh just locks it up for me!
0
Reply
What size magnets do you need for this?
The designer has replied
0
Reply
Oh sorry I`ve forgot to said that, this model need 2 pcs Φ6mm*2mm N52 round magnets to attaching it onto the toolhead.
0
Reply
Replying to @lloydliu
The correct size is Φ4mm*2mm. I`m sorry for my carelessness.
0
Reply
Boosted
Thanks
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld