A mount for a rollator light for ease of both being seen and seeing bumps in the path/road in dark areas or night. I angled the light down by 15° as the light I used is a bright bike light and the original design was shining into eyes of people walking towards me, and into cars blinding drivers. If you use a different light please test it before taking out to make sure you dont come across the same issue.

I use M4 screws and a nut to tighten it against the frame, and a longer screw to attach the light to the mount.

This is the light i used, however the top of the model is flat so should be able fit other lights too as long as they mount by a screw. There is enough surface you could try glue/doublesided tape aswell