PTFE hose anti wear for Bambu Lab P1S, X1
Copyright Claim
PTFE hose anti wear for Bambu Lab P1S, X1
Boost
86
142
71
Print Profile(1)
0.16mm layer, 2 walls, 15% infill
9 min
1 plate
Boost
86
142
71
3
281
266
Released
Description
PTFE hose anti wear for Bambu Lab P1S, X1
The PTFE hose anti wear where you see it starting to wear the hose is always making contact with top glass.
PETG or PLA
Thank you ;-)
Comment & Rating (71)
All
Works!
(Edited)
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
works perfectly with petg
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
cool, don't have any goop on the top of my glass plate.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
perfect print file !!!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
great print file, thank you.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Works as advertised, no scuff-marks on my glass plate.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Excellent solution to keep the tube from rubbing the glass on the top of the X1 Carbon.
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
I switched it to petg and it printed one fine. there's nothing in the design to keep the thing at the apex of the ptfe tube and I think it will just slide down instead of protecting it, but I can probably think of something
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld