Hexagon Birdhouse / Honey Comb Bird House

Copyright Claim

Hexagon Birdhouse / Honey Comb Bird House

Boost
79
119
18

Print Profile(1)

All
P1P
P1S
X1
X1 Carbon
X1E
A1

0.28mm layer, 3 walls, 10% infill
0.28mm layer, 3 walls, 10% infill
Designer
6.9 h
3 plates
5.0(14)

Open in Bambu Studio
Boost
79
119
18
8
102
53
Released

Description

A simple hexagon birdhouse that you can easily match to your house décor. It is an easy print requiring no supports with all snap together parts. I recommend using PETG. Includes a perch or a plug if the perch is not wanted.

 

Assembly Tip: Insert the faceplate on edge and slightly force it into the body. It can be inserted or removed with a little force.

Comment & Rating (18)

Please fill in your opinion
(0/5000)

Nice print profile! I changed the location of the hole because the birds weren't coming in. I Also reduced the face plate size in 0.9 mm, making easier to put it in place.
(Edited)
2
Reply
Print Profile
0.28mm layer, 3 walls, 10% infill
good print. my 5 year old wanted to make some adjustments, so I cut a piece off in studio, and made overhangs and support posts. also cut it the back so wee can see time birds from inside the house.
2
Reply
Boosted
Print Profile
0.28mm layer, 3 walls, 10% infill
Boosted. Great design and print profile. I scaled it a tad larger.
1
Reply
Print Profile
0.28mm layer, 3 walls, 10% infill
nice simple design
1
Reply
Print Profile
0.28mm layer, 3 walls, 10% infill
came out great using Bambu PETG-CF. The first cylinder broke taking off the plate for the first attempt. The front face plate was difficult to get in but happy with the results. Will try with some other colours too.
0
Reply
printed, wow it really needs some force to snap the face plate in, I'll recommend the scale it down a little bit and use some glue.
1
Reply
Boosted
Print Profile
0.28mm layer, 3 walls, 10% infill
Printed out a couple of these in different colors with PETG and they turned out great.
0
Reply
Beautiful strong design, a little disappointed I broke the front plate twice tring to get in in place, printed a second one a tad small but still wont go all the way in .
0
Reply
Boosted
Sturdy, simple yet functional
0
Reply
Print Profile
0.28mm layer, 3 walls, 10% infill
excellent thanks
(Edited)
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.