Skadis/Uppspel holder for 4x A1mini build plates! by eds_3d_shop

eds_3d_shop

3D Printer>3D Printer Accessories

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Designer

2.2 h

1 plate

5.0(5)

PETG with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Designer

3 h

1 plate

5.0(1)

Boost

Released

Description

⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏

Skadis/Uppspel (IKEA) holder for 4x A1mini build plates!

Skadis/Uppspel-Build plate holder for A1mini. This can hold 4 build plates very comfortably! 👌

This holder was specially designed to be very narrow while still holding the plates very well, and it can be attached to the popular Skads/Uppspel pegboard from IKEA to save space on the maker table. 😉

This holder is easy to print on the A1mini - just use my well tuned print profiles.😍 I used two “Mice-Ears” for better bed adhesion and two tree supports for upper hooks there - just remove them off easily after printing (with pliers/cutter knife)👍

If you don't want to use print profiles - STLs with and without “Mice Ears” are attached here too. Just print them with default PETG/PLA settings.

Print Instructions:

just use your favorite default PETG/ PLA profile, BUT - set your printer better to the “silent” mode for better quality of the walls!

— ! —

Thanks for downloading and rating in advance and please don't forget to like this model! :-)

Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:

🔗**Eds_3D_Shop designs on MakerWorld** 🔗

If you like my work and want to support me - please follow me https://linktr.ee/eds_3d_shop and if you want - you can buy me a coffee! https://linktr.ee/eds_3d_shop

Thank you for your support and.. happy printing!

Ed ;-)

Comment & Rating (16)

@Lothum

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Finally tested high speed filament. Note: inside is a little tight for these aftermarket pei sheets. Official plate fits Perfectly.

The designer has replied

@eds_3d_shop

Hi! 🖐️😃 Thank you very much for great feedback and make! 🙏😍👍 It was perfect for my plates here, I will make the slots a little bit bigger, just for the case 🦾😎🙏

@eds_3d_shop

Hello! I revised the holder accordingly and it is online (v.4) Now the slots a little bit bigger. Thank you for helpful feedback! Ed 🙏😉

@davidmenges

Nice. Forgot "slow".

The designer has replied

@eds_3d_shop

😃👍Thank you for awesome make! Looks really cool!🙏😍👍 It will greatly support my work on such designs if you will boost this design! (Klick on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@user_1084028189

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

Very nice perfect fit for my build plates

The designer has replied

@eds_3d_shop

I’m really happy to hear that! 🤩👍Thank you for awesome feedback! 🙏😍👍 It will greatly support my work on such designs if you will boost this design! (Klick on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@SanEHV

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

thank you. printed pla + sunlu 220/60 a1 mini ams

The designer has replied

@eds_3d_shop

I’m happy to hear that! 🤩👍Thank you for awesome feedback! 🙏😍👍 It will greatly support my work on such designs if you will boost this design! (Klick on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

(Edited)

@KingPodling

Boosted

Print Profile

PETG with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

The designer has replied

@eds_3d_shop

Thank you for awesome rating! 🙏😍👍 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@KingPodling

Boosted

hello, I have 7 boost available. maybe you can look my designs and we can boost each other’s? greetings 👋🏼

@tomsi

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

The designer has replied

@eds_3d_shop

Thank you for your awesome rating! 🙏😍👍 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my other BambuLab designs! 🖐️😃

@oakhifi

Print Profile

PLA with "Mice-Ears" 0.2mm layer, 3 walls, 15% infill

The designer has replied

@eds_3d_shop

Thank you for cool rating! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

(Edited)

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.