“Coffee Adict”
If you like to scale, do it only with x and y axis, do not change z axis!
Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm
Filaments Used:
PETG BambuLab Basic Black
PETG BambuLab Basic Yellow
Swap Instructions: if you don't have ams just put pause on specified layers and swap filament manually
Start with Black
At layer #12 (1.04mm) swap to Yellow for the rest.
If you wanna use PLA:
Just a Black and Yellow Transmission Distance is not important in this case.
I wish you always a clean nozzle