This was just a random idea I had and was made possible with img2go. Theoretically possible to add colors but I stopped trying after an hour to make it work. Still pretty nice in b & w.
You can size it up or down in X & Y but don't change Z height, otherwise you need to figure out when to change filament and it might not work out.
I started adding stl to my models. Please keep in mind, depending on your machine, slicing takes from seconds to maybe a couple minutes. I use a 5600X and it takes about 30 seconds for this one while others literally takes 2 min+ or more.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Matte Black
PLA Sunlu Matte Dark Grey
PLA Elegoo Matte Gray
PLA Eryone Light Grey
PLA Eryone Matte White
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Gray 2.3
At layer #10 (0.88mm) swap to Gray
At layer #11 (0.96mm) swap to Gray
At layer #13 (1.12mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.