_______________________________________________________________________________________________________________________
☀️ If you want to sell prints of this model, as well as all of my models - future and past, become an Authorized Merchant member of my Patreon for a commercial license! ☀️
________________________________________________________________________________________________________________________
A beautiful set of coasters of a stormy waves during a clear night sky. The coasters have an edge to avoid sliding of the glass. They are also made in such a way that changing colors is possible by layers which saves a lot of filament!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA KINGROON Black Transmission Distance: 0.4
PLA KINGROON Blue Transmission Distance: 4
PLA+ Jayo Mint Green Transmission Distance: 4.5
PLA+ Jayo Sky Blue Transmission Distance: 4.4
PLA Jayo Matte White Transmission Distance: 4.6
PLA EryOne Mango Yellow Transmission Distance: 4.8
Color Pallete:
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue
At layer #19 (1.6mm) swap to Mint Green
At layer #24 (2mm) swap to Sky Blue
At layer #25 (2.08mm) swap to White
At layer #30 (2.48mm) swap to Mango Yellow for the rest.
Boost Me
If you enjoy my work and want to support me boost this model in show of support! Every single boost puts a smile on my face and is greatly appreciated! 🤜🤛
How to do more than 4 colors on a single AMS?
To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges.
Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS:
Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4
Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again!
This will allow you to Change the rolls of filament once the printer is done with that color.
For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need!
Drop me a follow!🤜🤛
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.