This is a ground up rebuild of twoforcemember's awesome LC90 Flashlight Holder (https://www.thingiverse.com/thing:3094682) - using the same dimensions as the original model.
I have been using twoforcemember's model for a while now and have zero complaints, it works perfectly! However I have found that when I charge the light, I need a place to stow the USB cable and this is my attempt to do that. There is a version with and one without a small 4.2mm diameter passage for a USB cable to go through.
When mounting, it would be best if it could be screwed into a stud or some solid wood since otherwise it could break out due to the force applied when using it.
It will need to print with supports (I used 75% overhang angle to minimize them).
I recommend printing it in the tall orientation to increase the strength of the clip (I broke the first one that was printing in the orientation as posted). See the pics. I printed in PETG since that's what I had in white (and it is more flexible than PLA).
If you need a holder for the Anker LC40 Flashlight, I have one of those here:
STEP file is included for remixing.
The standard disclaimers apply; no warranty, no guarantee, don't run with scissors, print and use it at your own risk, etc. Comments are appreciated if you find something that could be improved.
(imported from Printables)
If you find these models useful, please post a like or a comment with some pics of your prints.
You can find the other things I'm working on at my blog here. You can also follow me here or on Printables, to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:
Thanks for looking!