This is just a simple holder for an Anker LC40 Bolder LED flashlight (https://www.newegg.com/anker-lc40-hand-held-black/p/054-01ZZ-00017) and was inspired by (though not remixed from) twoforcemember's awesome LC90 Flashlight Holder (https://www.thingiverse.com/thing:3094682).

This holder also has a place to hang the end of a USB cable and a track to hold the cable for better cable management (sorry no pics but it is similar to my LC90 holder remix here (which shows how the USB cable management works):

 https://makerworld.com/en/models/391556 

It can be wall mounted with some #8 wood screws. If wall mounting, I'd recommend getting the screws into wood so they don't pull out a drywall anchor.

When I printed mine, I printed it vertically (see the pics) which should give the holder more strength. I also printed in PETG which has a bit more flex than PLA (which could crack). Aside from that I would recommend using 3 walls and 20% gyroid infill and making sure your steps per mm and flow is calibrated (to insure dimensional accuracy), and your temp is hot enough to bond the walls properly. Mine fit perfectly when printed, but if you find it is too tight, some light sanding should do the trick.

If you print one please post a make. STEP file is included for remixing. 

The standard disclaimers apply; no warranty, no guarantee, don't run with scissors, print and use it at your own risk, etc. Comments are appreciated if you find something that could be improved.

(imported from Printables)

If you find these models useful, please post a like or a comment with some pics of your prints. 

You can find the other things I'm working on at my blog here.  You can also follow me here or on Printables, to see what new stuff I post.  If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!