When using the Augury spell your DM is supposed to tell you if good or bad things are going to happen with “Weal, Woe, and Weal + Woe”. I wanted to have some fun cards that would stand up to the occasional spillage so I made these.

To get the exact look I made here are the instructions:

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA+ Sunlu Skin Transmission Distance: 5
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Matte Ivory White Transmission Distance: 4

Settings:
.04mm nozzle
.08mm Layer
.16mm First Layer Height
100% Sparse Infill Density
Rectilinear Infill Pattern

Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Sakura Pink
At layer #17 (1.44mm) swap to Ivory White
At layer #18 (1.52mm) swap to Skin
At layer #19 (1.6mm) swap to Sakura Pink
At layer #20 (1.68mm) swap to Ivory White for the rest.