打印时必须启用花瓶模式,建议将外墙厚度设置为1.2,以便将内部隔板粘合在一起
The vase mode must be enabled for printing, and it is recommended to set the outer wall thickness to 1.2 in order to bond the internal partition board together
在流量高于30mm^3/s的0.6mm直径热端上可以在一小时内被快速打印出来
It can be quickly printed out within one hour on a 0.6mm diameter hot end with a flow rate higher than 30mm ^ 3/s
使用高品质的耗材可以获得绝佳的打印结果