Pikachu Multicolor by entroisdimensions_figurine

entroisdimensions_figurine

Miniatures>Creatures

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 3 walls, 10% infill

Designer

13.1 h

1 plate

4.7(36)

A1 Mini Plate - 4 color AMS - 4 units at 80%

12.4 h

1 plate

5.0(13)

Pikachu Sitting, 1 Color, 0.18mm layer, 2 walls, 10% infill

2.1 h

1 plate

5.0(5)

No Support, One Color - 0.18mm layer, 3 walls, 5% infill

1.5 h

1 plate

4.6(5)

Click to see more

Boost

404

581

1.5 k

422

Released

Description

Pikachu is now available, and you have the choice between different file formats:

STL
3mf for Multicolor Bambu Lab printer
3mf for Multicolor Prusa printer

Video of printing the model: Instagram, TikTok, YouTube

For printing, I used PolyTerra PLA filament from Polymaker:

5 colors version:

To discover which new models will be released next, follow @polymaker_figurines:
Instagram, TikTok, YouTube

Join the Figurines Community on Discord

Happy Printing!

-----------------------------------------------

Printer settings on the Bambu Lab X1C

Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 10%
Filament brand: Polymaker
Filament color: brown, white, black, yellow, red
Filament material: PolyTerra PLA

pokemon

pikachu

Comment & Rating (82)

@user_507806800

Print Profile

0.2mm layer, 3 walls, 10% infill

too much waste, especially at the ear, every time a change to yellow is not necessary. but yes, once you have printed them all, you have planned a whole forest with Polyterra.

(Edited)

@burdis.o

Yes, there is a lot of garbage! You produced even more garbage because your Print has become very bad.

@user_507806800

Replying to @burdis.o :

them you the wisdom of

@3DP0

Print Profile

0.2mm layer, 3 walls, 10% infill

An excellent model and probably one of my best prints in the 2 weeks I’ve had my printer. If you are new and confused about how to get 5 colours out of one AMS, message me and I will help you.

@jsc37601

how

@3DP0

Replying to @jsc37601 :

So, you put the first 4 colours in, obviously. In the slicer, you add a pause between a colour you need and a colour you don't need and replace the two colours in the AMS during the pause, then continue the print. You can tell the AMS which colour you will be replacing by telling it which slot it's going to go into in the AMS.

@langen28

thanks

@user_1221769864

非常不错的皮卡丘模型，尾巴的链接可以再坚固一点，避免拆除的时候容易断开

@sujalmakesstuff

Print Profile

0.2mm layer, 3 walls, 10% infill

most adorable print I’ve done, absolutely LOVE IT.

@dresende

Print Profile

0.2mm layer, 3 walls, 10% infill

The ears could be simpler without yellow inside but other than that it printed very nice 😀

(Edited)

@xilow44

Print Profile

0.2mm layer, 3 walls, 10% infill

Thanks :)

@Beardeddude916

Print Profile

Pikachu Sitting, 1 Color, 0.18mm layer, 2 walls, 10% infill

Good Pika model, thanks for sharing!

@user_375647322

cute

@mjoshd

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Excellent profile! Thank you for sharing 🙂

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(6)

Description

Comment & Rating (82)

License

Related Models

Venonat multicolor

Venomoth Multicolor

Pokeball Pokemon Gen 1 Frame

Parasect Multicolor