Badger badger badger badger badger badger badger badger badger badger badger badger MUSHROOM MUSHROOM!

Measures approx. 100mm x 66mm.

The included 3MF file will have the colour swaps already set up. Alternatively, use the STL and set up your own filament swaps and settings as per the instructions below.

If you need to resize this print, change only X and Y dimensions. Altering the Z height will mess up the layer colour swaps.

Unlike typical HueForge prints, this uses relatively thick layer heights.

Print at 100% infill with a layer height of 0.24mm with a base layer of 0.24mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Beige Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #6 (1.44mm) swap to Brown
At layer #8 (1.92mm) swap to Beige
At layer #11 (2.64mm) swap to Red for the rest.