Updated Version available (V4):
A slim wallet that offers space for 7 cards and a drawer for cash.
I looked for a long time for a wallet that had enough space for cash, but I couldn't find one so I made this one myself.
Important: Some information about printing:
- The wallet is printed standing up
- No support is necessary.
- First, the WalletConnector and WalletDistributer must be printed. Then the WalletCase.
- In the wallet case I added an "M600" command at layer 39 so that the printing then stops. You have to do this by yourself in your slicer!!!
- At Layer 39 the print will stop. Now insert the previously printed WalletConnector and WalletDistributer as in the picture below.
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000387640/design/2024-03-22_0ae69b1ffefec.png?image_process=format,webp)
- Then you continue the print. The printer will now print over the two parts.
- Note: If you have problems with the cards not staying in, you can put cloth or glue like in the picture below.
![](https://makerworld.bblmw.com/makerworld/model/DSM00000000387640/design/2024-03-23_e9442323396ac.png?image_process=format,webp)
Have fun with it and leave a like or subscribe if you like it!
If there are any suggestions for improvement, feel free to write a comment.