Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA+ Sunlu Red Transmission Distance: 3.6
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Red
At layer #9 (0.8mm) swap to Yellow
At layer #11 (0.96mm) swap to Ice Blue for the rest.