Minecraft-inspired Cat Mini Figure Kit / Keychain by chiz_m

chiz_m

Toys & Games>Other Toys & Games

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

4-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

Designer

1.3 h

1 plate

4.9(17)

single color, no sprue, 0.2mm layer, 2 walls, 15% infill

Designer

17 min

1 plate

4.2(6)

0.2mm layer, 2 walls, 15% infill

1.4 h

1 plate

Boost

179

303

351

181

Released

Description

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!

WARNING: Contains small parts. Not intended for children below 7 years old.

A base/diorama builder is available for download for this mini figure model!

_____________

IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS

Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs.

I will not hesitate to report to Etsy and other online sites if I find them being sold.

__________

Easy-to-assemble, quick print, kit card of Minecraft Cat in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.

Print as oriented, with NO supports needed. Model comes with breakaway supports.

Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)

Usage Options

Assemble as is and use as toy/collectible; or
Use the alternative part with loop and glue the halves together to make for a great keychain ornament!

Comment & Rating (31)

@tonyst

ok I'm rubbish at jigsaws, but the mini cat printed same size in one colour black is rather difficult to fit together without instructions or a side view of the cat! Ok so i've worked out that there are two bits, one for the keyring and one for without the keyring. the model fits well as same size but when scaled up the two body halves need the spigot sanding back to fit together and the head doesn't move as half the stem for the neck is missing from the keyring half. That said, both my kids loved them, even the small same size one.

(Edited)

The designer has replied

@chiz_m

Yeah, so I really didn't include an assembly guide since I believe it's part of the fun to figure out how parts go together. I do provide for more complex ones like the Fox (https://makerworld.com/en/models/13270#profileId-13192) When you scale up, it's expected that the connectors will be looser cause effectively you're also enlarging the gaps as you scale up.

@Kadrim

Print Profile

4-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

sweet kitty, was easy to assemble

@tinacoffeencats

Print Profile

4-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

Difficult to put together but I used my nippers and fixed it. very kind to include the ring and regular attachment. may try to scale up and reprint to see if I get the same results. small issue with the print on the tail on one of them but likely fixed if I scale it up a bit.

@Jdubs

turned out great!

@alhargans

Print Profile

4-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

it was so cute!

@tonyst

Print Profile

single color, no sprue, 0.2mm layer, 2 walls, 15% infill

Kids liked it, the file on the print bed was a bit small for me.

The designer has replied

@chiz_m

By default they are small. They the almost the same scale as the official Minecraft mini figures: (https://www.youtube.com/watch?v=ozvQuf-n4YM&pp=ygUWbWluZWNyYWZ0IG1pbmkgZmlndXJlcw%3D%3D) This is the perfect size as I also intended them to be used as keychain ornaments, hence the loop.

(Edited)

@tonyst

yes the Minecraft world is new to me. I’m still on the learning curve with the x1c and the kids are 3 and 5. still great little models - now that I’ve realised there’s a piece for keyring or without!

@chiz_m

Replying to @tonyst :

3 and 5! 80 Please be careful with the really small parts. You can always print it in a bigger scale though if you want :) The parts will be a little loose coz the gaps are gonna increase too but you can use glue to assemble them ;)

@Bigfoot7923

Print Profile

4-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

The kids love them all. Had to print out the whole set.

@Veledar

Print Profile

single color, no sprue, 0.2mm layer, 2 walls, 15% infill

The designer has replied

@chiz_m

Thanks for the rating!

@iron.man

Print Profile

single color, no sprue, 0.2mm layer, 2 walls, 15% infill

@TheHortonHustle

Print Profile

single color, no sprue, 0.2mm layer, 2 walls, 15% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(3)

Description

IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS

Usage Options

Comment & Rating (31)

License

Related Models

Cat - Articulated Figure Keychain

Panda - Articulated Figure Keychain

Rabbit - Articulated Figure Keychain

Sitting Cat Figure