Minecraft-inspire Skeleton Minifigure Kit/Keychain by chiz_m

chiz_m

Toys & Games>Other Toys & Games

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

2-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

Designer

1.4 h

1 plate

4.7(64)

single color, no sprue, 0.2mm layer, 2 walls, 15% infill

Designer

20 min

1 plate

4.7(20)

𝐀𝟏 𝐌𝐈𝐍𝐈 - 0.2mm layer, 2 walls, 15% infill

1.7 h

1 plate

3.7(7)

Boost

361

641

121

928

707

Released

Description

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!

WARNING: Contains small parts. Not intended for children below 3 years old.

Printable assembly guide now available for download.

A base/diorama builder is available for download for this mini figure model!

_____________

IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS

Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs.

I will not hesitate to report to Etsy and other online sites if I find them being sold.

__________

Easy-to-assemble, quick print, kit card of Minecraft Skeleton in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.

Print as oriented, with NO supports needed. Model comes with breakaway supports.

Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)

Usage Options

Assemble as is and use as toy/collectible; or
Use the alternative part with loop and glue the halves together to make for a great keychain ornament!

Documentation (1)

Assembly Guide (1)

Assembly Guide - Skeleton.pdf

Comment & Rating (121)

@Mathis

Boosted

Print Profile

⭐𝐅𝐚𝐬𝐭 ‣ [PLA] 0.16mm - BiColor

print perfect

The designer has replied

@AneoPsy

Thanks for reviewing, I appreciate the feedback.

@0Nothing

Print Profile

2-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

Love these models! Trick or Treaters are going to love them too. All the Halloween extras are going to a school’s prize box that has kids with mostly special education: autism, ODD, ADHA, and other diagnoses or what not that they have a hard time in regular public schools.

The designer has replied

@chiz_m

I agree! They make great party favors and giveaways to kids. :) Just be careful though giving away to really young children as there are small parts on the model. Thanks for the feedback, rating and for posting your make!

(Edited)

@ShawnC

Print Profile

2-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

Printed really well. I upscaled in BambuStudio by 25% I also added some more second color to the space between ribs. I will need to tune purge settings at color switch to address the banding and I'll probably reprint with top layer ironing to smooth the front face out. Awesome Model!!!

The designer has replied

@chiz_m

Looks great! good idea adding black between the ribs! thanks for the rating!

@OrangeSs

Print Profile

2-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

The designer has replied

@chiz_m

Thanks for the rating and for sharing your print!

@Mateusz.D.Jabol

Print Profile

2-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

The designer has replied

@chiz_m

Thanks for the rating and for sharing your prints! Looks great!

@ShawnC

Model reporting Floating regions as well as Error 591 non-manifold edges w (Repair) suggestion

The designer has replied

@chiz_m

The floating regions are normal because of the cavities where the pegs go in. As for the non-manifold, I have not seen it on my end. Nonetheless, I updated the kit card - skeleton.stl. Would be great if you can try it again and let me know if you're still having the same issue.

@mosh

Print Profile

single color, no sprue, 0.2mm layer, 2 walls, 15% infill

thanks for the model!

@Kadrim

Print Profile

2-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

Great Design, my Kids will love it :-D

@Birkehue

Print Profile

𝐀𝟏 𝐌𝐈𝐍𝐈 - 0.2mm layer, 2 walls, 15% infill

Hard to assemble because of a not so snug fit 😅 Cute tho

@tinacoffeencats

Print Profile

2-color, 4 cards, 0.2mm layer, 2 walls, 15% infill

Difficult to put together but I used my nippers and fixed it. very kind to include the ring and regular attachment. may try to scale up and reprint to see if I get the same results.

(Edited)

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

300% Brick Batman

3dmieks

299

452

Skeleton Bat keychain

Quirkys3dprinting

Price Kit

newtonj0007

205

149

Fidget Counter Skeleton Cover MOD

Marek Adamczyk @ 3D