A basic 3D printer tool holder that mounts to your AMS utilizing the AMS wall gaps.
This is a remix of Yop1403 model. The original model had a space for the glue stick, glue bottle, scraper and PTFE tube remover. I have modified it to suit my own purposes including adding spaces for;
- side cutters
- long nose pliers
- brush
- deburring tool
- allen key set (4, 3, 2.5, 2, 1.5 mm) + original BBL allen keys
- nozzle cleaning needles in 0.3, 0.4, and 0.6mm sizes
- screwdriver
- tweezers
- Isopropyl alcohol spray bottle
- electronic callipers
In addition, due to the additional weight, I added a reinforcement block that slides up into the AMS unit for additional strength and stability
- Printed in BBL matte charcoal
- I added a modifier in Bambu studio to increase strength in the AMS connecting block (100% infill) .
- I added a second modifier in the calliper hooks to increase infill to 25% and 6 wall loops
- I enabled a 2mm brim as the calliper hook was warping
- the rest of the model is 0.2mm 2 wall loops @15% infill
- 3h37m print time 48.47m filament