This is a set of modular bathroom organizer baskets meant to be used for glass panels.

This set comes with the following components that you can then choose to assemble any way you wish:

1. 230mm glass hooks - meant to hook from the top of the glass panels. There's two types - one that is one-sided hook, and another with two-sided hooks
2. 230mm basket-to-basket hooks - meant to hook from one basket to another in case you want to use more than one level of baskets.
3. 150mm variant of the hooks - shorter variant of the hooks. Not recommended to connect two baskets together with these ones as they can restrict the space on top, especially if you want to put shampoo bottles.
4. 200x140mmx90mm Baskets. Each baskets have open bottom with lips. This way you can easily change the bottom panel, or take them out for periodical cleaning easily. Basket walls are 3mm thick. There's two variants of baskets - solid and the ones with vertical slits.
5. 200x140x50mm Baskets. This basket is meant to be used at the bottom most layer, as it only contains one hook connection. There's 2 variants - normal, and one with cutout. The cutout variant is suitable for placing small items or bar of soaps.
6. Solid and slit base plates to be inserted in the baskets. I do not recommend the solid one to be used as-is, as it will not drain liquids well. However, they are useful if you want to use any infill-pattern as the opening at the bottom. Set the top and bottom walls to 0 and use at least around 20% of infill with the pattern of your choice.

Assembly Guide:

Top Layer

1. Print two units of the glass hooks (either 230mm or 150mm single or double, according to your needs)
2. Print a basket of choice
3. Print a base of choice
4. Insert the hooks at the back of the base and then hang the entire assembly on your glass panels

Subsequent Layers

1. Print two units of basket-to-basket hooks
2. Print a basket and base of choice
3. Inset one end of the hooks at the back of the existing basket (at the bottom) from the middle, and then slide them to the end, and the other end to the top of new basket

Note: These are designed for glass walls that are about 10mm thick. If you require different thickness, feel free to reach out to me and I will make them for you!