I'm not really sure what it's supposed to be depicting but I see a couple creatures in it. Really like how it turned out and its thick all around with a nice finish. Made with img2go.
You can size it up or down in X & Y but don't change Z height, otherwise you need to figure out when to change filament and it might not work out.
I started adding stl to my models. Please keep in mind, depending on your machine, slicing takes from seconds to maybe a couple minutes. I use a 5600X and it takes about 30 seconds for this one while others literally takes 2 min+ or more.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Matte Black
PLA Sunlu Matte Dark Grey
PLA Elegoo Matte Gray
PLA Eryone Matte Light Grey
PLA Eryone Matte White
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Grey
At layer #11 (0.96mm) swap to Gray
At layer #15 (1.28mm) swap to Light Grey
At layer #19 (1.6mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.