It is easter time and this is something just right for this season. A modern looking voronoi easter egg light. You can place this into a shelf with the included stand or hang it on a wall.

As a light strip I have used these 10m long ones from AliExpress: https://s.click.aliexpress.com/e/_Demg7zT (this is an Affiliate Link. When you order with this Link I get a small provision and that helps to support my work)

These LED lights are a real bargain for what they offer :)

As filament I have used a blue transparent PETG Filament for the inner part and matte white PLA Filament for the bottom and outer part.

If you want, you can change the infill pattern of the inner part in the slicer to achieve a different look of the inner part. I recommend a pattern with straight lines. A gyroid pattern for example is really difficult in this application.

The assembly is pretty straight forward.

The first step is to insert the whole LED strip through the hole of the combined inner and outer part.

In the next step you have to install the led strip to bottom plate. When you are finished it should look like this. You can secure the led strip with some hot glue.

In the last step you have to glue the two parts together. I recommend to use superglue.

If you have questions, just send me a message.

Happy printing :)