Ultimate Filament Spool by befree

befree

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

4.5 h

2 plates

5.0(14)

Label combo 2 colours 0.2mm layer, 2 walls, 15% infill

Designer

2.1 h

1 plate

Boost

152

Released

Description

Ultimate Spool Series

I had problems with the spools already published and I needed some practice in Fusion so i started to make my own filament spool from scratch. I print nearly everything with AMS, so I needed a AMS Bambu filament spool with the following propertys:

Clip integrated (clickable clip), fixes filament within the first 20 mm
Tight lock mechanism
Very good result with "only" PLA
Respool inserting points
a scale
stable but possible lightweight
Label integrated and changeable
optimized for 3d printing on every edge
no supports

The spool was tested in AMS and printed with a P1S in PLA and with 0,20mm standard profile. No need to make any changes.

A big insparation was the work of @KobaRiley with his ClipSpool V2 . I liked the idea of having the clips integrated and the changeable labels so much, that it was a must have. Thanks for that

integrated second clickable clip for respooling ( left and right of the “nose”

both sides are “empty” in the body but very stable through structure. You can also see the scale on thes render. It goes from 10 - 100 %

There are two Versions available of "Side 2". One with and one without a scale.

Labels

There are a few finished labels in the Folder Labels you can instant use. If you want to have your own Textstyle or whatever :D please feel free to use the .step file to create your own in CAD or you can also use my predefined Make a Sign Template.

Download json templatefile: This One
Go to Make my Sign Page
Click “Create from Blank” (On top right corner)
In the dialog “Start with Template”, click “Import template(JSON file) >”
Select the downloaded file from step one from your filesystem
Accept change diolog
Change the Text like you want it
Download your customized Sign
Assemble a blank Label with your new Sign

Here is a video how to make the Label from the sign:

Feedback Welcome

Please let me know if you have any requests. It would also be nice to have a lot of feedback. Cheers

Updates

28.03.2024 - Needed a LabelRack for my HoneyCombWall - So I added it to the Raw files for you too.

Comment & Rating (25)

@Marvin_A

Print Profile

0.2mm layer, 2 walls, 15% infill

Seems perfect for Bambu Lab refills. The system for label is a good idea.

The designer has replied

@befree

I only use bambu lab refills, so yes, its for that. Are other filaments rolls different?

@Marvin_A

Replying to @befree :

I'm not sure if other refills are different, but some spool models are 1-2mm too large, causing the filament to go to the sides and get stuck. Your model seems correct and if it wasn't, you would have seen it as you only use Bambu Lab! :) I had some eSun refills before, but they are difficult to find now. I I buy an eSun I will test it with your spool.

@befree

yes nice, tell me the differences, perhaps I will have time to make some additions

@user_2937688747

What a great design. Perfect!

The designer has replied

@befree

Thanks

@user_3794991475

Print Profile

0.2mm layer, 2 walls, 15% infill

printed great

The designer has replied

@befree

Thanks for your comment and pictures! did you print the label into the spool? The labels are a bit smaller then the spool, that’s why it printed not so well at this point. I will make you a version with a fixed, not changeable label if you want. btw, we are „wallbrothers“

(Edited)

@al.gauthier

I LOVE this design, however after printing a few and finally loading with Bambu filament, I've noticed that the little track on the side to hold the filament, isn't wide enough to accept the Bambu filament. Is this a known model issue? Sadly my spools are now rubbish as I can't contain the filament. I have used the slow design in other printable spool with great success so didn't think to test these given they look so well designed.

The designer has replied

@befree

which Little Track? could you give me a picture? do you mean the respool clip? every clip needs a bit of force to clip picture 6 and 7 are clipped with bambu a little bit of force with your nail on the first 5-10 mm of filament should be enough to click it into the track

(Edited)