i create this “holder” for filaments and anything that fits like shoes.
i have separate all components in different plates so you can print whatever you need.
is a very modular design so you can makeit as big or small as you like.
i suggest to print every component at 124% speed to reduce printing time with no difference in quality ( i havent tested 160% so speed up at your risk), the only exeption for speed are the screws and rods as the treads may be hard to fit.
to remove the support from the screws and rods i suggest to “screw off” the support whith a little bit of force (if you have delicate hands use gloves or some big pliers).
before mounting screw the screws in the roads 2/3 times for easy assembly later.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.