On the way home, I saw this small sweeper cleaning on the street and found it quite cute, which is why this model was born.
At first, it was like making a model ornament, but later on, I realized that the sweeper definitely wanted to sweep the floor, so I gave it the function of sweeping 😂。
(Although it's possible to sweep away the debris on the desktop, don't expect to sweep it clean too much) 😁）.

Printing instructions:
1. The parts are printed in the form of plates, and there are also loose parts inside. You can choose one from two options;
2. It is recommended to use petg for the wheels, axles, and rolling wheels, as they are more durable. pla can be used for the outer shell and exterior components.
3. The orange warning light was painted on transparent consumables using an acrylic marker and then printed. For this operation, specific instructions are provided below.
Assembly instructions:
1. In addition to printing parts, an additional 4 M3x10 screws (self tapping screws or ordinary screws) and two rubber bands with a diameter of about 20mm need to be prepared

2. We need to use four tools: paper cutters, scissors, screwdrivers, and 502 glue, so please pay attention to safety!! Do not let children operate alone unless necessary!!
3. The assembly time is less than half an hour.
4. I will organize the assembly steps into a document, but it will take time

----------------------------------------------------------------------------------------------------------------------------------------

Regarding the application of orange warning lights:
1. After slicing, find the total estimated length in the upper right corner；

2. Use an acrylic marker or other acrylic pigment (preferably blended with alcohol) on the transparent filament, and apply it evenly to the filament according to the length found in the previous step. Actually, it's okay to apply less than the length, at least 3/4 of the length.

Finally, if you like my model, please give a positive review after printing. Thank you！😁