For all M&M's eaters that have an half empty 1kg or 750g Nutella Jar hanging around, this dispenser is for you !
Simple and easy to print with only three parts, it will fit nicely in any room, and will be more elegant than a M&M's bag.
None of the pieces requires supports, i recommend printing them in 0.2mm layer height for the parts to fit nicely.
If the rotating part have hard times fitting in the dispenser, reduce its size in the slicer, 99.5% or less should do it.
This can't be more simple ! Just insert the rotating part in the dispenser chassis until you feel some resistance and a “click”, then, put the clip on the rotating part.
Once done with the dispenser assembly, you just need to screw the nutella jar into it.
This model is currently compatible with 1kg Nutella jars, I will do adapters for 750 and 500g ones if needed.
It should also work with most M&M's types, but I only tested it with peanuts one.
Sometimes, the peanut M&M's tend to get stuck because of their random shapes, I'm working to solve that problem on the futures versions.