I Love making Hueforge Pictures and I am going to upload more and more of them so follow me if you like my work and i would be happy if you give me a like :)
You dont need an AMS . you can change manually the Filament if you want.
you can also use other Filament if you like
Use my Settings for best Results.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Yellow Transmission Distance: 10
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.64mm) swap to Red
At layer #13 (1.2mm) swap to Yellow
At layer #19 (1.68mm) swap to White for the rest.