Electrolyte Box (Elotrans, Katerfly, etc.) Remixed by 3DJupp

Remixed by

3DJupp

Tools>Medical Tools

GIF

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

All-in-One, PLA+TPU, 0.16mm layer, 2 walls, 15% infill

Designer

7.2 h

3 plates

4.0(1)

Seal/TPU, 0.16mm layer, 2 walls, 15% infill

Designer

14 min

1 plate

Hinges & Latches, PLA, 0.16mm layer, 2 walls, 15% infill

Designer

59 min

1 plate

Box, PLA, A1 Mini/bigger, 0.16mm layer, 2 walls, 15% infill

Designer

6.5 h

2 plates

Boost

Released

Description

Added a logo to the all-in-one printable version.

Thisisstillnotaa commerial product - but it will fit a 10x Box of Elotrans or similar.
Please take care of the different materials, TPU can not be printed in any AMS, use an external Spoolholder for TPU.
Bed adhesion is crucial for TPU. I recommend Printafix/PrintLac etc.

Comment & Rating (2)

@Noodle_Doodler

Print Profile

All-in-One, PLA+TPU, 0.16mm layer, 2 walls, 15% infill

Printed box in PETG, latches in PLA, and gasket in TPU. I gave four stars because the latch mechanism is cumbersome. Does it work? Yes. However the hinges don't auto align the box pieces and the latch requires you to reset it. Also, the label only prints on one side and you can only see the faint outline of color on the other side. Requires 8 M3 screws.

The designer has replied

@3DJupp

Hey, Lovely print and thanks for your rating, the PLA Profile is just fine, it might be okay to just swap the materials. For the PLA Profile, there are to Labels.: If needed, feel free to upload a PETG profile, i might do it, when possible.