A1 Mini MagSafe Wireless Charger

A1 Mini MagSafe Wireless Charger

Boost
28
23
5

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
7.3 h
7 plates
5.0(1)

Boost
28
23
5
1
58
12
Released

Description

THIS IS ONLY A1 Mini MODEL.
Other models below:
Bambu Lab A1 : https://makerworld.com/en/models/221396
AMS Lite Model : https://makerworld.com/en/models/221402
AMS Lite Top Mount : https://makerworld.com/en/models/375557

 

UPDATE: This model have been updated to hold MagSafe Wireless Charger on the bed.
FOR THOSE WHO HAVE ALREADY PRINTED THE MODEL, ALL YOU HAVE TO PRINT IS ONLY THE NEW BED AND BUILD PLATE!

The bed moves along Y axis as well as the toolhead moves along X and Z axis .
SD Card is included in the print for realism as well.
Changeable build plate with different patterns.

NO AMS IS NEEDED so everyone can print it.
You will need only glue to assembly it.

TIPS: To fit the air distributor around the nozzle, you can trim a little bit if the fit is tight (see the photo near)

FEEL FREE TO COMMENT AND ASK QUESTIONS

ASSEMBLY GUIDE:


Push Z Axis all the way down!



Comment & Rating (5)

Please fill in your opinion
(0/5000)

I apologize if I missed it but is there a print bed that includes the bed without the cutout for the wireless charger and the build plate for the bed that does include the cutout for the wireless charger? I think the 3mf may be missing those parts. Without either one of those parts the bed plate can't press into the bed. Thank you!
The designer has replied
0
Reply
I forgot to upload the right build plate after the update of the model and I apologize for that. I uploaded the right build plate for the bed that have the cutout for the magsafe charger. Thank you for noticing that mistake and letting me know!
0
Reply
Replying to @goodlucker :
Thank you so much! I really appreciate it. This was a great print. The tolerances were perfect.
0
Reply
would be super if you could add a spool holder that you could use the spools from your ams and maybe a mag charger for a iPhone ,, awesome thanks
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.