When I bought Bambu products, the original factory gave me a lot of accessories, I was very happy and worried about how I should store so many accessories, so I decided to print a storage box for Bambu original accessories, and I also added the position for placing the blade and glue in it. The storage requirements of the storage box basically met 90% of the users.
M5 ruthex (M5x4x7) inserts x 10
M5x20 screws x 8
M5x28 screws x 2
10x1mm circular magnet x 4
In order to facilitate the purchase of accessories, so I unified the use of M5 screws and nuts. 8 nuts are used to fix the wings and 2 nuts are used to flip. At the same time, I also used 4 round magnets. When installing magnets, glue is needed. At the same time, pay attention to marking the front and back of magnets. If it is fixed and found to be installed in the opposite direction, it will be a huge trouble to remove them later. So be sure to check both sides of the magnet before fixing the glue.
Cover printing needs to pay attention to the problem of curling, I encountered serious curling when printing the cover, so I set the cover printing parameters in the settings, especially the speed setting, mainly for the curling problem, if you have your own better understanding of curling, you can change the printing parameters according to your own understanding.
当我购买Bambu产品的时候,原厂给了我很多配件,我很高兴,也很担心这么多配件该怎么存放,所以我决定打印一个Bambu原厂配件的收纳盒,我还在里面增加了放置刀片和胶水的位置,收纳盒的收纳要求基本上满足了90%的用户。
为了方便选购配件,所以我公司统一使用M5螺丝和螺母。8个螺母用于固定机翼,2个螺母用于翻转。同时,我还使用了4个圆形磁铁。安装磁铁时,需要胶水。同时,注意标记磁铁的正面和背面。如果固定好了,发现安装的方向相反,以后要把它们拆下来就麻烦了。所以在固定胶水之前一定要检查磁铁的两面。
盖子打印需要注意卷边的问题,我在打印盖子的时候遇到过严重的翘边,所以我在设置中对封面印刷参数进行了设置,特别是速度的设置,主要是针对翘边的问题,如果你对翘边有自己比较好的理解,可以根据自己的理解改变打印参数。