Y'all liked the last Koi filament painting I did, so I tripled it!

Bambu Studio users can use the 3MF with all the filament swaps already loaded in. For those of you who don't, or want to set up your own filament swaps and settings, please follow the instructions below!

If you need to resize this to a bigger print, PLEASE ONLY CHANGE THE X and Y DIMENSIONS. Altering the Z height will make the layer swaps incorrect.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA Kingroon White Transmission Distance: 8
• PLA BambuLab Tough Vermilion Red Transmission Distance: 3
• PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

• Start with Black
• At layer #19 (0.92mm) swap to White
• At layer #37 (1.64mm) swap to Vermilion Red
• At layer #44 (1.92mm) swap to Jade White for the rest.

_______________________________________

If you'd like to support me, I now have a Patreon!

Joining will give you behind the scenes information on WIPs, access to a private discord, early access, includes models that are otherwise paid, and more!

If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon!

_______________________________________