Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Protopasta Cobalt Blue Transmission Distance: 5
PLA PolyTerra Forest Green Transmission Distance: 0.5
PLA PolyTerra Army Beige Transmission Distance: 0.5
PLA Protopasta Partly Sunny Yellow Transmission Distance: 12
PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Cobalt Blue
At layer #10 (0.88mm) swap to Forest Green
At layer #12 (1.04mm) swap to Army Beige
At layer #18 (1.52mm) swap to Partly Sunny Yellow
At layer #22 (1.84mm) swap to White for the rest.