Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used:
PLA Overture Matte Black Transmission Distance: 0.1
PLA Overture Space Gray Transmission Distance: 2.1
PLA PolyLite Pro Magenta Transmission Distance: 1
PLA Overture Matte White Transmission Distance: 3.7
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Space Gray
At layer #10 (0.88mm) swap to Magenta
At layer #13 (1.12mm) swap to White for the rest.

If you would like my work and interested in donating to the filament fund, or would want to have something special made, feel free to drop a donation or join my patreon for early access and request priority prints.

https://www.patreon.com/sblayeredcreations