Desiccant container bambu spool by FabiWe

FabiWe

Education>Engineering

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.12mm layer, 3 walls, 20% infill

Designer

2.3 h

1 plate

4.3(13)

Boost

126

Released

Description

This container is designed for the original reusable spool of BambuLab to store desiccant in the roll and thus keep the filament dry in a box or vacuum bag. Approximately 70 grams of desiccant can be filled into the container. The container is closed via the cap screw and remains in the spool.

The Spool+ container can also be used inside the AMS!

Comment & Rating (15)

@emcy_uk1

Print Profile

0.12mm layer, 3 walls, 20% infill

quality print

@RayHbigdog

Print Profile

0.12mm layer, 3 walls, 20% infill

perfect

@ChrisBalise

Printed great in PLA on Bambu cool plate (X1C). One thing (and I may have missed it), is the perforated end plates have a taper on them where the snap into the spool and cap. They obviously index via the two pins, but wondering which direction the taper should go when snapping them in. Should the smalling ID go towards the inside of the spool or out?

@ALHASS

Print Profile

0.12mm layer, 3 walls, 20% infill

Tough to screw, Tough to get in the roll...

@PhilGeorge

Print Profile

0.12mm layer, 3 walls, 20% infill

Great print, but could help by a less fine screw thread as needed to be helped in attaching its top.

@opman1010

Print Profile

0.12mm layer, 3 walls, 20% infill

Strength Issue:the threads are tight and stringy, when screwing it together, the print failed (broke) on the lid

The designer has replied

@FabiWe

I printed it now 20 times and had no problem. Did you calibrated your filament? Slice the model with your own parameters and check again. Please add to your comment some pictures of the broken lid, thank you!

@StarSDF

Print Profile

0.12mm layer, 3 walls, 20% infill

(Edited)

@harrisondavies

Print Profile

0.12mm layer, 3 walls, 20% infill

@andrej86

Print Profile

0.12mm layer, 3 walls, 20% infill

@cathers

Print Profile

0.12mm layer, 3 walls, 20% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

BambuLab AMS Desiccant Tray w/ OEM lid

Lazy_Mardeux

506

1.3 k

Print Profile(1)

Description

Comment & Rating (15)

License

Related Models

BambuLab AMS Desiccant Tray w/ OEM lid

Funnel for AMS Dessicant Holder

Desiccant container for Spools - Large

Desiccant Spool dryer V2