skeleton meditating by Holmes

Holmes

Household>Decor

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

0.16mm layer, 2 walls, 10% infill

Designer

4.8 h

1 plate

4.7(19)

0.12mm layer, 2 walls, 10% infill Gyroid

5.2 h

1 plate

4.8(12)

Open in Bambu Studio

Boost

135

172

130

Released

Description

This is a meditating skeleton it is a good decoration for the Halloween.

Comment & Rating (41)

@PlateandNozzle

Print Profile

0.12mm layer, 2 walls, 10% infill Gyroid

For a ready-to-print profile that can be printed from the app, I gotta say this thing is great. Some minor support trouble that can be fixed using BL Studio directly, however, this turned out great for printing from the app. Nice work!

The designer has replied

@KinokoLabs

Thanks for the input. I felt the same about the supports but I'm new to this and thought they were all needed. Maybe some can be avoided. Did you print directly in that color or is it painted already?

(Edited)

@PlateandNozzle

Replying to @KinokoLabs :

I still have A LOT to learn myself. That’s sometimes the best part. Keep it up! Printed directly in this color. No post-painting done. Printed using that nice Bone color from eSun PLA+.

(Edited)

@KinokoLabs

Replying to @PlateandNozzle :

That's a nice color for bone figures. Need to get one to print some dinosaur bones 😁

@jblazed718

Print Profile

0.12mm layer, 2 walls, 10% infill Gyroid

Great print but supports were a pain to remove

(Edited)

@schwindt

Print Profile

0.16mm layer, 2 walls, 10% infill

absolutely gorgeous! not for yogis only 😎🧘‍♂️

@Bambzle

Print Profile

0.12mm layer, 2 walls, 10% infill Gyroid

supports failed

The designer has replied

@KinokoLabs

Failed how?

@Bambzle

Replying to @KinokoLabs :

Too thin, single wall tree supports fell over…

@KinokoLabs

Replying to @Bambzle :

Didn't happen to me. What filament did you use?

@nairb3D

Print Profile

0.16mm layer, 2 walls, 10% infill

Used as haloween decoration. Great profile worked great.

@Bambzle

Print Profile

0.16mm layer, 2 walls, 10% infill

the supports didn’t work out that great in some areas. so the overhanging is a bit rough.

@Katlines

Print Profile

0.16mm layer, 2 walls, 10% infill

love this guy

(Edited)

@KinokoLabs

Printed great but had to tweak the model in the Studio by cutting a slice of the bottom part. It had some artifacts on one feet causing the model to be floating and with lots of supports bellow it. Simplified the model down to 787662 triangles and reduced the layer height to 0.12mm for a finer quality. What type of paints did you use for the model on your photos?