Bambu Lab Spool Weight for AMS
Copyright Claim
Bambu Lab Spool Weight for AMS
Boost
67
133
50
Print Profile(1)
Lid&Can, PLA, 0.16mm layer, 2 walls, 15% infill
1.9 h
1 plate
Open in Bambu Studio
Boost
67
133
50
2
333
328
Released
Description
To improve my freeCAD skills I designed this Basic spool weight can.
It is designed for Bambu Lab spools with an inner diameter of 55 cm (the can is 54cm).
Actually I put 8 AA batteries inside but I ordered some weights on Amzone. (https://www.amazon.de/gp/product/B01MCVQNTH/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)
There is also a container for silica https://makerworld.com/de/models/41788#profileId-42323
Comment & Rating (50)
All
Print Profile
Lid&Can, PLA, 0.16mm layer, 2 walls, 15% infill
Damn good and helpful, thank you very much for the files 🥰
However, I also designed and printed a centerpiece myself. Would it be possible to make the diameter a little smaller? It works great with eSun cardboard rolls, but I can't get it into the plastic ones 🙈 Maybe 0.5mm smaller!? I would have to measure it.
1
Reply
Print Profile
Lid&Can, PLA, 0.16mm layer, 2 walls, 15% infill
Works perfectly, thanks
1
Reply
Print Profile
Lid&Can, PLA, 0.16mm layer, 2 walls, 15% infill
Passt perfekt in die Bambu Spools 👍
1
Reply
Print Profile
Lid&Can, PLA, 0.16mm layer, 2 walls, 15% infill
(Edited)
The designer has replied
2
Reply
love it!
0
Reply
Boosted
Print Profile
Lid&Can, PLA, 0.16mm layer, 2 walls, 15% infill
Funktioniert super - habe es mit alten Muttern/Schrauben gefüllt und anschließend mit Beton ausgegossen. Wiegt nun 375 Gramm.
1
Reply
Print Profile
Lid&Can, PLA, 0.16mm layer, 2 walls, 15% infill
print is good but doesn’t fit iiidmax spools
0
Reply
Print Profile
Lid&Can, PLA, 0.16mm layer, 2 walls, 15% infill
top
2
Reply
Print Profile
Lid&Can, PLA, 0.16mm layer, 2 walls, 15% infill
excellent and use them when spools get low, scaled a couple down to fit smaller hole in a spool.
1
Reply
Print Profile
Lid&Can, PLA, 0.16mm layer, 2 walls, 15% infill
Good print, tight but workable. Many thanks!
1
Reply
Print Profile
Lid&Can, PLA, 0.16mm layer, 2 walls, 15% infill
easy to print and does the job
1
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
Related Models
© 2024 MakerWorld