Tube PTFE cut
Copyright Claim
Tube PTFE cut
Boost
15
13
5
Print Profile(2)
0.16mm layer, 4 walls, 30% infill
Designer
47 min
1 plate
0.2mm layer, 4 walls, 30% infill
47 min
1 plate
Boost
15
13
5
0
73
20
Released
Description
PTFE tube cutter. Made of PLA, using a cutter blade part.
You only need 2 M3x8 screws and 1 M3x10mm screw
Comment & Rating (5)
All
Print Profile
0.16mm layer, 4 walls, 30% infill
just drilled the ptfe slots for perfect hole.
Print pretty easily
Maybe adding a 45° path to cut filament would make a handy 2 in 1 tool.
(Edited)
The designer has replied
1
Reply
nicee, good color!!
0
Reply
Print Profile
0.16mm layer, 4 walls, 30% infill
I would recommend using M3x12mm and two M3x6mm instead of the screws in the description. At the time of this review, the description does not mention what size the blade is. I had 18mm blade and was able to fit two sections of it. Knocking off a star for missing information, otherwise prints just fine and is still functional.
1
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill
merci beaucoup imprimé en abs fonctionnel et pratique
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill
I didn’t insert a blade, but this made a nice way to hold the tube and make a 90 degree cut
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial
© 2024 MakerWorld